Recent content by Syg4d

It is the nylon protective layer that I havent peeled off shining

Fastarc G1 is working well for me on BH, please compare the zqh90 with the inspira plus after you test the inspira plus!

I think he meant that ayous core in inner carbon structure is stiffer than kiri core in outer carbon type

Regular J3 has very low throw, so I only recommend using it on blades that create naturally high arc, even then powerlooping requires care to not hit the net or outta the table. Not relevant to your question but might be helpful and it's fresh off my mind: Comparing J3 39 (not boosted) to H3 neo...

Try lighter rubbers, otherwise coming from hari szlc, the ZAC should feel quite familiar, very similar arc but with slightly softer, lighter, less substantial feel (I only hit w hari szlc briefly).

Seems like the HC is better for chinese/slower rubbers and the MK is better for japanese/esn/faster rubbers then

Both are well balanced, not head heavy, between the two, fzd alc is slightly more nimble, airy. Speed is actually comparable, difference in feel is the typical difference between limba and koto, ZAC is slightly softer, more dwell time, FZD ALC is slightly more crisp, snappy. ZAC is easier to...

Could you compare the hybrid carbon (HC) and mk carbon (MC) a bit more? Is the HC handle much smaller than MC? Must be since the boll alc's handle is not that big and the HC is smaller. Which do you prefer? Difference in feeling, hardness, flex, power away from table, general quality of loops...

I also want to share the same enthusiasm with this blade. I've always been more of a limba top ply kinda guy due to the feel, the dwell, the spin. I feel better on the FH side with limba. I've tried several koto outer ALC blades like viscaria, fzd alc... and while I can play decently well with...

Mine was the Tmxi Pro which is very different from the regular Tmxi, one is better for looping, one is better for hitting. The pro has thicker top 2 layers and thinner core and huge head size (160x152) so it feels much softer and flexier than the Tmxi.

I tried Trinity briefly, didn't like its handle as much, while good in size its a little flatter compared to the zac and typical handle like viscaria. The handle also came loose on the copy I was using... so not sure about manufacturing quality there. The ZAC has a bigger head size so the...

Well chinese rubbers like H3 do tend to make a glassy, higher pitched sound that is completely different to non chinese rubbers especially if you hit hard

Haha yes I have only tried it recently and I actually quite like it on the Bh side, slightly less bouncy than the newer esn stuffs, lower throw, very stable. It's a little heavy though so I will probably try something else after this one wears out.

Hi, I wanted to share my quick review of this recent blade. Composition: Limba - ayous - ZAC - Ayous - ZAC - ayous - limba. ZAC is a mix of Arylate, Zylon, and Carbon Thickness: 6.0mm Blade face: 158cm x 152cm Design and feel Look is oviously subjective. For my taste, I like the design: simple...